Equipment Installation
Mounting
Using a level, measure to position your mounting areas precisely. Use appropriate fasteners (not included) to secure
the enclosure to the wall.
Warning: The area you plan to mount the enclosure to must be able to withstand the weight of the enclosure and all
mounted equipment. For the weight of the enclosure and its capacity, see the specifications on page 5.
Install equipment until you have stabilized the enclosure. The threaded holes in the middle of each rack unit are
numbered. A single rack unit includes the space occupied by the numbered hole and the holes directly above and
below.
Note: If using sliding equipment rails, be careful when extending the rails. Do not extend more than one set of sliding
equipment rails at one time. Avoid extending sliding equipment rails near the top of the enclosure.
Locate the numbered openings in the mounting rails where you plan to install your equipment. Lower your equipment
into the enclosure and set it down on the mounting rails, lining up the mounting holes on the equipment with the
mounting rail’s mounting holes.
