Installation Instructions
Page 3
Step 4.
Rear Bracket Attachment: Move the slide rails back approximately 10 inches. You
may need to loosen the thumb screws to do this.
Attach the Rear Rack Brackets and the Cable Arm Extension as shown below.
Attach using (4) 8-32 x 3/8” Pan Head Screws and (4) 8-32 Nuts. The screws
should be located in the slots as far apart from one another as possible (see
below). Tighten all screws.
The Cable Arm Extension can be attached to the right or left, based on your
cabling needs.
(2) Rear Brackets
(4) 8-32 Nuts
(4) Screws 8-32 x 3/8 (gold)
(1) Cable Management Bracket
Slide the Outer Rails back ~ 10"
