JOINING 2 RACK IT PRO
CABINETS TOGETHER
DO NOT FIX 2 x
4 DRAWER UNITS!
4 x fixing points to join 2 Cabinets
correct
correct
incorrect
MADE IN CHINA | DISTRIBUTED BY:
Zenexus (AUS) Ph. 1300 734 714 Zenexus (NZ) Ph. 0800 443 058
AUSTRALIA: RACK-IT.COM.AU NEW ZEALAND: RACK-IT.CO.NZ
4 DRAWER CABINET
ASSEMBLY INSTRUCTIONS
ITEM CODE:
01904
RACK
IT
OPTIONS
YOU’VE DONE IT! CUE WARM INNER FEELING OF SATISFACTION.
RACK IT PRO CASTOR KIT
(item 01907, sold separately).
Easily fix PRO Castors to make a rolling 4 Drawer unit.
Stack and join a
RACK IT PRO 2 DOOR CABINET
(item 01902) on top of your
RACK IT PRO 4 DRAWER CABINET
.
WARNING:
DO NOT STACK 2 x 4 DRAWER CABINETS.
The Top Panel (Part E) is supplied with 4 x pre-fitted nuts.
The Bottom Panel of the 2 DOOR unit has matching
pre-punched holes so the 2 units can be bolted together.
Stand back and marvel at your Rack It PRO 4 Drawer Cabinet. Now all that’s left to do is
find the right space to put it. Be sure to fix the Safety Strap to the Top Panel of your
Cabinet with a self-drilling TEK screw, and attach the other end of the strap to the wall
– so it doesn’t do anything crazy, like tip over.
We knew you had it in you!
Now is the time to enjoy tossing these instructions in the recycling. And, don’t forget, if
rolling’s your thing, you can add Rack It PRO Castors (sold separately). And if you want to
take your Cabinet to the next level, it’s easy to fix a Rack It PRO 2 Door Unit on top.
THIS PRODUCT SHOULD BE ANCHORED TO THE WALL OR OTHER SUITABLE SURFACE TO AVOID SERIOUS INJURY OR DEATH.
To help avoid any serious injury or death, this product has been supplied with a Wall Strap to prevent toppling. We strongly recommend that
this product be permanently fixed to the wall or other suitable surface. Fixing devices are not included since different surface materials require
different attachments. Please seek professional advice if you are in any doubt as to how to permanently fix the product or as to what fixing
devices to use. Check anchors regularly.
