10
c.
Setting of the cutting height
According operation to be performed, adjust the
desired cutting height; Grasp the lever, pull it to the
right and then lower it to decrease the cutting
height or raise it to increase the cutting height
d.
Lateral discharge
Open and hold the flap of the side discharge. Install the lateral discharge by putting the
hooks on the bar. Then release the flap.
You must fit the mulching adapter in order to use the side ejector. Hook in the side ejector
adapter.
e.
Back discharge
If need to use the back discharge function, screw out the bolt about 40mm.
To use the back discharge function you must open the ejector flap slightly.
The mulching adapter is not allowed to be fitted when the rear ejector is used.
