USE
Mains voltage
Ensure that the local mains voltage is in conformity with the information on the rating
label. The machine is designed for use with single ph
ase alternating current 230 V˜ / 50
Hz and is double-insulated. Make certain that the rated voltage stated on the
machine’s
type plate matches the local mains voltage before using the machine. If the work area is
not close to the mains outlet, an extension cable with a sufficient conductor cross
sectional area (min. 1.5 mm²) must be used. The extension cable used should be as
short as possible. Always ensure that any extension cord used is fully unwound to avoid
a risk of overheating.
Fitting / changing sanding plates
Caution! Disconnect the unit from the mains before carrying out any maintenance or
adjustments.
The multi sander is supplied with 2 interchangeable sanding plates:
-
Triangle sanding plate.
-
Finger sanding plate.
Remove the fitted sanding plate by removing the mounting screw by using a screwdriver.
Fit the required sanding plate/attachment to the base of the machine.
Secure the sanding plate/ attachment by replacing and tightening the mounting screw.