Racing RAC4000T-A1 Original Instructions Manual Download Page 13

 

 

13 

the dipstick (bottom edge of the dipstick). Do not overfill. 

Replace the oil tank plug / dipstick 

 

FUEL 

NOTICE

:  Engine  delivered  without  gasoline;  refuel  0.8

 

litre of before starting the engine. 

 

Remove the filler cap.   

 

Add fuel to the bottom of the fuel level limit in the neck 

of  the  fuel  tank.  Do  not  overfill.  Wipe  up  spilled  fuel 

before starting the engine. 

 

Tighten the fuel tank cap 

Tank Capacity: 0.8 L, Essence: 95 or 98 oct.

 

 

WARNING! Gasoline is extremely flammable. 

Store fuel in specially designed cans for this purpose. 

Fill the fuel tank only outdoors and before starting the engine. Do not smoke when filling 

the fuel tank or handling fuel. 

Never open the fuel tank cap and never add fuel while the engine is running or when it 

is hot. 

If fuel has spilled, do not start the engine any further, move the tool away from where the 

fuel has been spilled, and be careful not to create a spark or flame until the fuel vapours 

have dissipated. 

Fully close all fuel tank and fuel canisters. 

Before tilting the mower to maintain the blade or drain the oil, empty the fuel tank. 

WARNING:  Never  fill  the  fuel  tank  indoors,  while  the  engine  is  running,  or  before  the 

engine has cooled down for at least 15 minutes after use. 

CAUTION: Do not use unapproved gasoline, such as E15 and E85. Do not mix the oil 

with  gasoline  or  modify  the  engine  to  operate  with  alternative  fuels.  The  use  of 

unapproved  fuels  will  damage  the  engine  parts  and  will  void  the  engine  warranty.  To 

protect the fuel system from scale formation, add a fuel stabilizer to the fuel. All fuels 

are  not  identical.  If  start  up  or  performance  problems  occur,  change  supplier  or  fuel 

Summary of Contents for RAC4000T-A1





























Reviews: