21
5.1 Charging the battery pack (Fig. 2)
• Connect the charger to the charging station (Fig. 2).
• Check that your mains voltage is the same as that marked on the rating plate of the battery
charger. Plug the battery charger in a socket-outlet. The red LED (Fig. 2 / Item 1)
comes on to
indicate that charging voltage is available.
• The battery pack is being charged. An empty battery pack requires a maximum charging period
of 1~2hours. The temperature of the battery pack may rise slightly during the charging
operation. This is normal.
• As soon as battery pack is fully charged, the red LED (Fig. 2/Item 1) extinguishes
If the rechargeable battery fails to charge, check whether there is voltage at the socket outlet.
Timely recharging of the battery pack will help it serve you well for a long time. Recharging is
always necessary when you notice a drop in the tool’s performance.
Never allow the battery pack to become fully discharged. This will cause it to develop a defect.
6. Operation
The area to be cut must first be cleared of stones and other solid objects. The safety lock-off
(Fig. 1/ Item 3) prevents the tool being started unintentionally. Activate the safety lock-off (Fig. 1
/ Item 3) by pushing it forward and pressing the ON/ OFF switch (Fig. 1 /Item 4) at the same
time. To switch off the tool, let go of the ON/OFF switch (Fig. 1 / Item 4).
6.1 Cutting grass
Allow the grass cutter to glide above the ground. The best results are achieved when the lawn
is dry.
When you notice a drop in cutting performance, re-charge the tool immediately so that the
battery does not become fully discharged.
6.2 Changing the blades Caution! Risk of injury!
To remove the blade, press the release mechanism (Fig. 3 /Item 2) and move down the blade
