Racing RAC26PHT-3, Instructions Manual

Page: 9 / 16

9
4. OPERATION
Use this device only when you are absolutely sure to control all the functions of it well. In case of doubts,
read again this handbook or inform yourself near a qualified person and/or your retailer. Ensure to be able
to easily turn off the engine with the STOP button of the handle.
a. Before cutting
- Make sure that the tool is properly assembled.
- Inspect the work area. Remove any materials or objects that may damage the tool or cause accidents.
- Remember that you must wear full protective gear and keep spectators away from the work area.
- Be careful to have a good walk and balance. Hold the tool with both hands firmly and keep it at an ideal
distance from your body.
a. Cold start of the engine
- Put the RUN/STOP switch on the position RUN.
- Put the choke lever on the position’;
- Put the hedge trimmer on a flat and stable ground.
- Vigorously pull 4 or 5 times the recoil starter until obtaining the starting of the engine.