Fig. 26 Fig. 27
INSTALL THE HANDLE
The handle is used to facilitate transfer and handling (Fig. 29). First, unscrew the two M8*20 bolts
on the variable speed bracket of rotary tiller (Fig. 30), turn the handle upward to the corresponding
hole position, and screw the two bolts in and lock with a wrench (Fig. 31). Fasten the clutch cable
and throttle cable to the left and right handrails with cable clamps (Fig. 28). Then check the
fasteners of the entire rotary tiller for tightness, wrong installation, and neglected installation, etc.
Fig. 28 Fig. 29
Right auxiliary
fender
M8*16 bolt
Hexagon head
bolt M8*20
Handle
