910084-M
Trak Kut II Saw
Phone: (262) 637-9681
Email:
www.racinerailroad.com
10.2018 Rev 1
Page 15
Carburetor Adjustment
1. Turn the T-handle carburetor adjusting needle in all the way
clockwise to reset.
2. Turn the needle out counter-clockwise two full turns for first
start-up.
3. Start the unit and let it warm up.
Note if the unit shuts down after releasing the throttle
trigger.
If unit continues to run, adjust the throttle linkage at the
carb until the saw shuts down when releasing the throttle
trigger
Attach an rpm gauge to the unit and note the rpm. The saw
should be set @ 8400 rpm.
Adjust the carb needle in or out to reach this setting.
Trak Kut II Maintenance Parts
Air Filtration Kit
Carburetor & Fuel Filters
Air Filter Screen
Base Plate & Fasteners
