910212- Battery Powered Rail Drill
racinerailroad.com
racinerailroad.co.uk
6.2023 Rev.1
Original Instructions
© 2023 Racine Railroad Products
Page
16
of
21
8. Repeat the drilling steps and complete the drilling operation.
9. When drilling is finished, turn off the tap to stop the coolant flow.
10. Remove the drill from the rail track
：
a.
Turn the handle counterclockwise to
loosen the clamp (about 3 turns).
b.
Lift the drill by the handle to remove it
from the rail.
Quick Removal of Drill in Case of an Emergency.
Do not use this function under normal
conditions.
Kick the handle directly and remove the drill.
After Use
1. Turn the power OFF as soon as possible after operation.
The battery function automatically turns OFF after 3 minutes of no operation.
To restart, press the safety switch.
