910210 - Battery Powered
D-Handle Impact Wrench
racinerailroad.com
racinerailroad.co.uk
6.2023 Rev. 1
Original Instructions
© 2023 Racine Railroad Products
Page
10
of
18
Section 3: Tool Operation
Personal Protective Equipment
Before operating this machine, make sure that all general safety precautions are
observed, and that proper personal protective clothing is worn as described below.
At a minimum, operators should wear the following Personal Protective Equipment:
1. Safety Glasses
2. Hearing Protection
3. Hard Hat
4. High Visibility Safety Vest
5. Leather Work Gloves
Lithium-Ion Battery Installation
1. Insert the battery into the position shown in the figure.
2. Lock the battery with the battery lock.
•
Press the battery button to open the battery.
•
The battery will automatically turn off after 3-5 minutes without any operation.
3. Press the Safety Switch before turning
ON the wrench.
•
To restart the wrench, press the Safety
Switch.
•
Note: The Safety Switch will
automatically lock after two minutes of
no operation.
