background image

 

910161 

Hydraulic Rail Drill

 

 

Phone: (262) 637-9681  
Email

[email protected]

 

www.racinerailroad.com

 

1.2023 Rev 3.1 

Original Instructions 

Page 31  

 

Section 6: Warranty Terms and Conditions 

Warranty Period

   

Each new machine and new parts of our manufacture are warranted against defects in material and 
workmanship for one year from the date of shipment from our factory.  

When contacting customer service for factory parts, service or warranty support please provide the:  

 

Racine Railroad Products Model 

 

Serial Number 

 

Any locally assigned identification   

Vendor Parts Warranty Period

 

Other equipment and parts used, but not manufactured by Racine Railroad Products, Inc., are covered 
directly by the manufacturer's warranty for their products. 

Warranty Parts and Service

 

We will repair or replace, without charge, F.O.B. factory, Racine, Wisconsin, USA, any part Racine 
Railroad Products manufactures which is proven to be defective during the warranty period.  

Material claimed defective must be returned, if requested, to the factory within 30 days from the date of 
the claim for replacement. Ordinary wear and tear, abuse, misuse, and neglect are not covered by this 
warranty. Depending upon the circumstances, we may provide technical assistance and/or technical 
service support, without charge, to assist in the correction of warranty related problems. 

 

Non-Warranty Parts and Service

   

Material damaged through normal wear and tear, abuse, misuse and/or neglect are not covered by our 
warranty and should be ordered directly from our Customer Service.  

Note

:  Parts for models that are no longer in production may not be available. 

Non-Warranty Parts Orders 

When placing a parts order please provide the following information: 

 

Company Name and Billing Address 

 

Purchase Order Number and Issuing Authority 

 

Shipping Address 

 

Special Handling Instructions 

 

Contact Phone Number 

 

Machine Model and Serial Number  

 

Part Numbers and Quantities Being Ordered 

Note

:  

Please use Racine Railroad Products part numbers when ordering parts. 

Racine Railroad 

Products part numbers are shown in the parts lists and drawings of this manual and have only 
six (6) numbers.  

Any part number with other than six numbers (e.g., contains alpha-numeric characters) is a Vendor Part 
Number and 

not

 a Racine Railroad Products part number 

Summary of Contents for 910161
































Reviews: