Racelogic VBOX Touch User Manual Download

Page: 17 / 115

Logging Status

The

Record Icon

will show when the unit is logging data to the SD card.

IMPORTANT

– The SD card shouldn't be removed when the Record Icon is on as you may lose data.

SD Status

The

SD Card Icon

displays the status of the recording media. When an SD card has been inserted and has free space,

it will display as

green

. When no SD card is detected or the media is full, the icon will display as

red

Tapping on the icon when green will manually start or stop logging data, overriding the

Configured Logging Strategy

Sats Status

The

Satellite Icon

displays the current GNSS status. More information on the different GNSS states can be found

here

Flashing Red

- No

satellite lock

Solid Green

- Standalone

positional accuracy; Code
Diff/SBAS positional
accuracy

Solid Orange

- RTK Float

Solid Purple

- RTK Fixed

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/03_-

_VBOX_Touch_Screen_Layout

Summary of Contents for VBOX Touch




















































































































Search results

Summary of Contents for VBOX Touch

Reviews:

Related manuals for VBOX Touch

Brands by name

Popular brands

Racelogic VBOX Touch, User Manual

Search results

Summary of Contents for VBOX Touch

Reviews:

Related manuals for VBOX Touch

Brands by name

Popular brands