Racelogic VBOX Touch V2 User Manual Download Page 4 | Manualshive

Page: 4 / 96

Racelogic VBOX Touch V2 User Manual Download Page 4

SDXC cards (64 GB and above)

Purchased SDXC cards will be formatted in

exFAT

or

NTFS

file formats; these formats are not supported by VBOX

Touch (please reformat as per instructions below).

SD Card Reformatting

• FAT32 reformatting for media with sizes up to 32 GB can be done directly within Windows by right-clicking on the

media and selecting '

Format

'.

• If you would like to format media with sizes above 32 GB into a FAT32 file system, this isn't something that can be

done directly within Windows as it is not the standard formatting for the file. However, many third-party software
programs can be used to reformat media to allow them to work correctly with our products - we can recommend

as a free option from the SD card organisation.

Power

The VBOX Touch unit is powered by a power cable with a Cigar Plug adapter for connecting to power within the vehicle.
The cable terminates in a 2-way Lemo connector that mates with the

socket on VBOX Touch.

On boot-up, the VBOX Touch will display a splash screen and automatically look for satellites and media.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/

User_Guide_%E2%80%93_VBOX_Touch_V2/01_Getting_Started_%E2%80%93_VBOX_Touch_V2

4

«
...
2
3
4
5
6
...
»

Summary of Contents for VBOX Touch V2

































































































Reviews:

No comments