Racelogic VBOX Touch V1, Quick Start Manual, Page: 13 / 14

Note: The first time that the unit is used, it may take up to 15 minutes to fully acquire satellites. After this, it will
usually take 1 to 2 minutes to acquire satellites.
17. The unit is now ready to display live Accel Test results.
18. By default, VBOX Touch will automatically start recording when travelling over 0.5 km/h, this can be changed
within the General Settings .
19. Tapping on the SD Card Icon when green will manually start or stop logging data, overriding the Configured
Logging Strategy .
20. The Record Icon will show when the unit is logging data to the SD card.
If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before
removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the
car is stationary. Always check the
Record Icon before ejecting the card.
IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC
before it can be reused.
21. A screenshot of what is displayed on the screen can be taken at any time by pressing the Screenshot Button .
22. To reset all test results shown on the current screen, press the Reset Button .
23. When you have finished your testing, completed test results can be viewed by pressing the Results Button .
More information on Accel Mode testing can be found here .
Data Analysis
A recorded session will be saved within the SD card as a .vbo file. This can be later analysed using our next generation
of data analysis software VBOX Test Suite .
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V1/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/Quick_Start_Guide_%E2%80%93_VBOX_Touch_V1%3A_Accel_Mode
13