2. The first time you connect, VBOX Sport and its corresponding serial number will appear in the '
DEVICES
' area, to
connect, simply tap the device.
3. A connecting progress wheel will then appear, once connected, VBOX Sport will move up to the '
MY DEVICES
'
area.
This only needs to be done once, in the future, whenever the device is in range and the Bluetooth is on, connection will
be made automatically.
Pairing with a second device
VBOX Sport can only be connected to one iOS device at a time. If you wish to connect to a new device, first you need to
remove the pairing on the previous iOS device by selecting the VBSport in the '
MY DEVICES
' list and then select
‘
Forget This Device
’. This only has to be done if the previous iOS devices Bluetooth connection is active.
After this you must clear the automatic pairing function of the VBOX Sport. This is done by pressing and holding both
buttons for
2 seconds
on the VBOX Sport at which point the Bluetooth LED flashes rapidly. (Note that this will only
happen if it has been previously paired with another device).
Once both stages are completed then you can repeat the initial pairing procedure with the new device. If you then
connect to your old device again, you will need to go through the pairing procedure again.
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started
2
