If you have come to a stop, but the
Record Icon
is still on, you must press the
SD Card Icon
to stop
the logging before you remove the SD card.
Sometimes, due to poor satellite visibility, for example in a garage or close to a building, Performance Box
Touch may start recording even if the car is stationary. Always check the
Record Icon
to make sure the
unit is not recording before you eject the SD card.
IMPORTANT
The SD card should not be removed when the Record Icon flashes red as it may cause you to lose
data.
Note: If the SD card is removed while the box is still recording, you may need to repair it on a PC before
you can use it again.
SD Card Format
Performance Box Touch V2 is supplied with an 8 GB SDHC card in a
FAT32
file format, which is the
only
file format
it supports.
If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7
MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that
you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch V2 unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the
FAT32
file format. This format
is
supported
by Performance Box Touch V2.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in
exFAT
or
NTFS
file formats; these formats
are not supported
by
Performance Box Touch V2. Please reformat as per the instructions below.
17
