11. Take the vehicle outside and wait for the Performance Box Touch to gain satellite lock. The
should display as
solid green
.
Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it
will usually take 1 – 2 minutes to acquire satellites.
12. The unit is now ready to display live Decel Test results.
13. By default, Performance Box Touch will automatically start recording when travelling over 0.5 km/h, this can be
changed within the
.
14. Tapping on the
when
green
will manually start or stop logging data, overriding the
.
15. The
will show when the unit is logging data to the SD card.
If you have come to a stop, but the
Record Icon
is still on, press the
SD Card Icon
to stop the logging before
removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the
car is stationary. Always check the
Record Icon
before ejecting the card.
IMPORTANT
– The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC
before it can be reused.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/
Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide
8
