Back
Press the
square
button with this line highlighted to exit
the Predictive Lap Timing Settings and go back to the
main menu.
Lap Timing Menu
Set Start & Splits
Pressing the
square
button sets a new start/finish point.
After this, the DSP04 OLED Display will read “Set split
1”. Press the
square
button to set the split or ▼ to skip
through split points, Finish line and back. If you set a
new start/finish or split line, the lap count, best lap and
all the best split time values will be reset automatically.
Clear Start & Splits
Press the
square
button to clear any start/finish and split
point information from the DSP04 OLED Display's
memory.
Note: If the OLED is connected to a VBOX data logger,
this will also clear the start/finish points in the memory
on the VBOX unit.
Reset Laptiming Data
With this option highlighted, press the
square
button to
reset the stored reference lap, lap count and lap times.
Note: This option fully resets the predictive lap timing
mode.
https://en.racelogic.support//Product_Info/Displays/OLED_Display/VBOX__OLED_Display_DSP04/
Quick_Start_Guide_%E2%80%93_VBOX_OLED_Display_DSP04
15
