DAC01 MANUAL
Page | 7
22 May 2014
Channel output tab
1.
Channel details – Enter or change selected channel name and units.
2.
Range – Expected input value minimum and maximum for selected channel.
Analogue mode settings
Level mode settings
Frequency mode settings
Set the minimum and
maximum voltage range to be
outputted by the DAC01
module. This corresponds
directly with the expected
input range as set on the left
hand side of this screen.
Here, high and low threshold
values can be set, providing
three different output states.
Each state can have a 0v or
12v signal associated with it.
For example, this setup is
such that once the satellite
count is over 10, 12v will be
outputted. As soon as the
count drops under 10, the
output will drop to 0v.
Set the minimum and
maximum frequency range to
be outputted by the DAC01
module. This corresponds
directly with the expected
input range as set on the left
hand side of this screen.
1
2
