10. Data save/Memory Lock –
This function allows you
to Save your laptimes
so you can compare them at a
later time.
You save the data in one memory bank at a time
Change to the Memory Bank where the data you want
saved is located, then Press the
blue
and
◁ (left yellow)
b
uttons at the same time.
On the LCD display "
Memory
" is blinking and the data in
the memory bank is stored.
Press
blue
and
▷ (right yellow)
buttons at the same time
to lock the data in and return to the common operation.
Note: When a memory bank is locked you cannot receive
data in that memory bank. You must move to another
unlocked memory bank in order to record new lap times. If
all 5 memory banks are locked you will not receive any
laptimes. See #7 – Changing memory banks.
11. Memory delete -
Press and hold
△ (up white)
,
◁
(left yellow)
button at the same time to delete the
data in the current memory bank. You delete the
data from one memory bank at a time.
The default is overwriting the data. When a memory
bank is full and reachs Lap 500, the data in Lap 500
is overwritten over and over until the data in that
memory bank is deleted.
