Race Technology DASH4PRO Instruction Manual Download Page 50 | Manualshive

Page: 50 / 51

background image

50

15

FAQs

1.

Can I use the DASH4PRO at night?

2.

Can the DASH4PRO be used as a standalone display?

3.

How do I connect the DASH4PRO to a PC?

4.

Can I use the DASH4PRO with my optical beacon?

5.

Is the DASH4PRO waterproof?

6.

What are predictive lap times?

7.

Can the DASH4PRO display predictive lap times?

1.

Can I use the DASH4PRO at night?

Yes. The DASH4PRO is backlit and the LEDs are dimmable so they are not too
bright for night time use.

2.

Can the DASH4PRO be used as a standalone display?

The DASH4PRO accepts data either from one of our Data Loggers, or from an
ECU interface. It cannot be used as an entirely standalone display in the way that
the DASH2 can.

3.

How do I connect the DASH4PRO to a PC?

For direct connection to a PC you need to be able to give it a separate power supply
by making up an adapter as shown here: -

Then you can use a null modem cable for connection to a PC. Note that if required
this cable can be purchased from Race Technology as a special order item.

4.

Can I use the DASH4PRO with my optical beacon?

No. The DASH4PRO is designed for use with the GPS system that is built into our
data logging products.

5.

Is the DASH4PRO

waterproof?

Yes. The DASH4PRO is a fully sealed unit.

«
...
48
49
50
51
»

Summary of Contents for DASH4PRO




















































Reviews:

No comments

Related manuals for DASH4PRO

Brand: Acer Pages: 2

Brand: Acer Pages: 16

Brand: Acer Pages: 50

Brand: Acer Pages: 2

Brand: Acer Pages: 3

Brand: Acer Pages: 2

Brand: Acer Pages: 15

Brand: Acer Pages: 35

Computer monitor

Brand: Acer Pages: 20

Brand: Acer Pages: 18

Brand: Acer Pages: 29

Brand: Acer Pages: 2

Brand: Acer Pages: 28

Brand: Acer Pages: 28

Brand: Acer Pages: 4

SyncMaster C27A750X

Brand: Samsung Pages: 91

SyncMaster S23A950D

Brand: Samsung Pages: 90

Brand: QSC Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands