-
21
-
Attention: If the ignition key is in the "ON" position and the driver moves the throttle handle,
the escooter will move! Do not put the key in the ON position until you are ready to go.
After starting, accelerate slowly and smoothly and do not attempt to reach maximum speed
quickly, otherwise electrical components may be damaged. If you push the e-scooter, turn off
the power supply to avoid accidentally moving the throttle handle and causing the e-scooter to
move unexpectedly, which could cause an accident. Use the brakes wisely and only when
necessary.
Battery Level Meter: If the battery level decreases and the indicator goes to [L] you should turn
off the battery and fully cha
「
ge the battery as soon as possible.
Notes: Do not expose the electric scooter to sunlight or rain for long periods of time, as this
could negatively affect the operation of some electrical components.
Special note:
If you frequently use the brakes or if you start and stop the engine frequently, if you are driving
upwind or uphill, or if you exceed the permissible weight of the load, this will affect battery
performance and range. If you want to positively influence the range, follow these tips:
a) Turn the throttle handle continuously to increase the speed gradually.
b) Do not brake too often - only when necessary.
c) If possible, do not start or turn off the electric scooter too often.
d} If you want to start, it is always best to do this only after moving the electric scooter a bit.
GENERAL USAGE NOTES
It is a good idea to keep a TOOL KIT and FIRST AID PACKET with you when you ride.
If your E-SCOOTER sustains an impact:
!
WARNING
A CRASH OR OTHER IMPACT CAN PUT EXTRAORDINARY STRESS ON
COMPONENTS, CAUSING THEM TO FATIGUE PREMATURELY. COMPONENTS SUFFERING
FROM STRESS FATIGUE CAN FAIL SUDDENLY AND CATASTROPHICALLY, CAUSING LOSS OF
CONTROL, SERIOUS INJURY OR DEATH.
First, check yourself for injuries, and take care of them as best you can.
Seek medical help if necessary. Next, if your E-SCOOTER is damaged, perform the checks
described in this manual. If you are unable to fix any or all damage/problems, or if you find any
bent, scored, or discolored parts, please call your local SCOOTER dealer.
Break-in Period: Your E-SCOOTER will last longer and work better when it is broken in properly.
Brake control cables, axle nuts may get loose when a new E-SCOOTER is first used and may
require an adjustment. We suggest that the brakes and axle nuts be checked every 30 days
and adjusted if necessary.
