Racal Instruments 1260-50A, User Manual, Page: 18 / 59

User Manual 1260-50A/B
Installation Instructions 2-1
Chapter 2
INSTALLATION INSTRUCTIONS
Unpacking and
Inspection
Before unpacking the switching module, check the exterior of the
shipping carton for any signs of damage. All irregularities should
be noted on the shipping bill. Remove the instrument from its
carton, preserving the factory packaging as much as possible.
Inspect the switching module for any defect or damage.
Immediately notify the carrier if any damage is apparent. Have a
qualified person check the instrument for safety before use.
Reshipment
Instructions
Use the original packing when returning the switching module to
Racal Instruments for calibration or servicing. The original
shipping carton and the instrument
’
s plastic foam will provide
the necessary support for safe reshipment. If the original
packing is unavailable, wrap the switching module in plastic
sheeting and use plastic spray foam to surround and protect the
instrument. Reship in either the original or a new shipping
carton.
Option 01
Installation
Installation of the Option 01 to the 1260-50A/B is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual.
Module
Installation
Installation of the 1260-50A/B Switching Module into a VXI
mainframe, including the setting of DIP switches, is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual. The ID byte DIP switch, SW1-5 should be set OFF for
the 1260-50A module and ON for the 1260-50B module.