background image

-5-

OPERATING INSTRUCTIONS

Note:

Before connecting to the mains power supply 

please ensure that the ON / OFF switch (1) 

is in the OFF position and the water supply is 

connected and is turned on. 

WARNING:

 Running the pressure washer without 

any water supplied to it will damage the pump.

1

Instructions for use

a) With the unit fully assembled, ensure that the 

unit is switched OFF and is connected to the 

mains supply and the water supply. Pull the 

trigger a few times to expel any air trapped in 

the system.

b) Ensuring that the trigger is released, switch ON 

the pressure washer. The unit is now ready to 

operate by pulling the trigger.

Note:

The motor only runs when the trigger is operated.

When the pressure washer is not in use, actuate 

the trigger gun lock for safety reasons . Switch the 

unit OFF when not in use for extended periods of 

time. Never operate the pressure washer without 

the water supply connected and turned on.

Trigger 

Gun Lock

Helpful Hints

Before starting cleaning remove any objects which 

could create a hazard.

Ensure that all doors and windows are closed 

(where appropriate).

The adjustable lance allows you to use a variety of 

spray patterns from a fan to a pencil jet.

When using the pressure washer to clean decking, 

patios, vehicles, etc., always start by using the 

fan spray and begin spraying from a minimum 

30cm away to avoid damaging the surface of the 

material to be cleaned.

Warning: 

Always check that NO damage can 

occur to the items you are intending to clean.

Always use safety wear for your personal 

protection.

General applications for this product are domestic 

cleaning tasks: Cars, motorbikes, caravans, and 

boats

Patio’s, fences, garden walls, pathway, driveways 

– particularly block driveways Roofs, brickwork 

and guttering Garden tools, furniture and 

barbecues Animal pens

Brushes

Your RAC pressure washer is supplied with a 

rotary brush (6) and a fixed brush (14).  Both 

have soft bristles and are ideal for cleaning car 

bodywork, windows etc.

The brushes connect directly to the Trigger gun 

(9).

Summary of Contents for RACHP189











Reviews: