5
5
4
6
9
ASSEMBLY
Before carrying out any assembly or disassembly of the unit please ensure that the unit is not connected
to the electrical supply.
Assembling your machine
Using a pozi drive screwdriver, screw the cable holder (18) onto the back of the unit, using the 4
1.
screws provided (19).
Lance holder (16) and lance rest (17) are supplied loose and need to be fitted into the appropriate
2.
slots provided on the unit, Fig 1. The lance rest (17) is retained in position using one screw (19).
Connect the high pressure connection hose (6) to high pressure outlet (4) as shown in Fig 1.
3.
Connect the trigger gun (5) to the high pressure hose using two 17mm spanners (not supplied). Fig 2
4.
Note: Using a spanner on the trigger gun connector and a spanner on the hose connector ensures
that you do not stress the internal components when tightening (spanners not included).
Fit the lance extension (9) into the trigger gun (5) by pushing the lance extension into the trigger gun
5.
and locating the lugs at the same time, then turn clockwise to lock into position, Fig 3
Fit the adjustable lance (11) into the lance extension (9) by pushing the adjustable lance into the
6.
lance extension and locating the lugs at the same time, then turn clockwise to lock into position.
Note: Do not fit lances when the power is on.
Fit the quick connector male (15) as per Fig 4 and make sure it is fully tightened
7.
Connecting to the water supply
8.
Connect the quick connector female (14) to your garden hose, then connect to the quick connector
male (15) as per Fig 5.
Fig 2
Fig 4
Fig 5
Fig 3
-3-
Fig 1
18
16
14
15
17
17
19
All manuals and user guides at all-guides.com
