HOW TO AVOID SURFACE DAMAGE
Damage to surfaces can occur when
the impact force of the water exceeds
the durability of the surface. Never use
a narrow high impact stream or a turbo/
rotary nozzle on a surface that is
susceptible to damage. Avoid spraying
windows with a narrow high impact
stream or turbo nozzle as this may
cause breakage. The surest way to
avoid damaging surfaces is to follow
these steps:
Before squeezing the trigger, adjust the
1.
nozzle to a wide fan pattern.
Place the nozzle approximately 4-5 feet
2.
from, and angled at 45° to the cleaning
surface and begin spraying.
Vary the fan pattern spray angle and the
3.
distance to the cleaning surface until
optimum cleaning efficiency is achieved
without damaging the surface.
Detergent Applicator
Only use detergents that are specifically
made for pressure washers or you could
damage the seals/ components inside
the pressure washer.
Follow the detergent manufacturer’s
directions for mixing the correct
concentrations of detergent to water
The ratio through the pressure washer
is approximately 5.4% (1 to 19).
Unscrew top of detergent applicator and
1.
fill applicator with detergent.
Replace top on applicator.
2.
Remove lance from gun.
3.
Attach detergent applicator to gun. (See
4.
Figure 12)
-7-
Figure 12 - Attach application to gun
All manuals and user guides at all-guides.com
