background image

We reserve the right to make technical changes.

Caution / transport

Prepare and check the implement for transport 

by road. Do not allow persons to stand or ride on 

the implement, or remain within its turning circle 

or operating area. Observe the relevant speed 

limits and traffic regulations when transporting the 

outfit by road. Take care when negotiating curves, 

as towed implements tend to swing out. Observe 

the road traffic regulations (StVZO or your local 

equivalent). These regulations normally make the 

user responsible for the secure hitching and safe 

operation on public roads of the tractor and the 

implements being towed. The attachment of towed 

implements must not lead to any excess with 

respect to the permitted axle load, laden weight 

or tyre load (depending on speed and pressure) 

of the tractor. For safe steering, the front axle of 

the tractor must bear at least 20 % of the vehicle’s 

unladen weight.

The maximum permitted width of the load is three 

metres. A special permit is normally required for 

moving oversized loads. In the case of front attach-

ment, the distance between the front end/ground 

loosener and centre of steering wheel /tractor must 

not exceed 3.5 m. If this ”front-end limit” is excee-

ded, the user must take appropriate measures to 

ensure that there is adequate driver visibility at 

the farmyard exit, road junctions and crossings. 

This can be carried out, for example, by use of a 

second person (on foot or in another vehicle) to 

give the tractor driver appropriate instructions. No 

avoidable overhanging item must endanger other 

traffic or road users (sect. 32 StVZO or your local 

equivalent). Overhanging items that cannot be 

avoided must be covered and fitted with warning 

notices. Safety devices include appropriate lighting 

and signs around all sides and the rear of the ve-

hicle and towed implement, e.g. red/white striped 

warning signs (423 x 423 mm). Additional lighting 

is required if the towed implement blocks those 

already fitted to the tractor, or weather conditions 

make it advisable: e.g. to front and rear, if the 

towed implement is wider than the tractor’s lights 

by more than 40 cm, or overhangs by more than 1 

metre with respect to the existing rear lights.

If an additional pair of headlamps is required for 

the front-mounted configuration (with only one 

set of headlamps switched on at once), a special 

permit is normally required.

A lighting system – with warning panels – can also 

be obtained from RABE as an optional extra.

When transporting on public roads in Poland, the 

warning triangle (7.1/1) must be fixed to the centre 

of the machine.

7

7.1

1

Summary of Contents for Digger HA


























Reviews: