RabbitCore RCM3315, User Manual, Page: 73 / 160

User’s Manual 67
It is recommended that you allow for an “exclusion zone” of 0.04" (1 mm) around the
RCM3305/RCM3315 in all directions when the RCM3305/RCM3315 is incorporated into
an assembly that includes other printed circuit boards. An “exclusion zone” of 0.08"
(2 mm) is recommended below the RCM3305/RCM3315 when the RCM3305/RCM3315
is plugged into another assembly. Figure A-2 shows this “exclusion zone.”
Figure A-2. RCM3305/RCM3315 “Exclusion Zone”
NOTE: All measurements are in inches followed by millimeters enclosed in parentheses.
0.08
(2)
0.08
(2)
J3 J4
Exclusion
Zone
2.725
(69.2)
1.850
(47.0)
0.6
(16)
0.6
(16)
2.81
(71.2)
1.93
(49.0)