RabbitCore RCM2300, Getting Started Manual

Page: 16 / 31

12 RabbitCore RCM2300
2.4 Where Do I Go From Here?
We recommend that you proceed to the next chapter and install Dynamic C (if you do not
already have it installed), then run the first sample program to verify that the RCM2300
and the Prototyping Board are set up and functioning correctly.
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Section 3.5 to get a basic familiarity with
Dynamic C and the RCM2300’s capabilities.
2. For further development, refer to the RabbitCore RCM2300 User’s Manual for details
of the RCM2300’s hardware and software components.
A documentation icon should have been installed on your workstation’s desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
default.htm
in the
docs
folder in the Dynamic C installation folder.
3. For advanced development topics, refer to the Dynamic C User’s Manual , also in the
online documentation set.
2.4.1 Technical Support
NOTE: If you purchased your RCM2300 through a distributor or through a Z-World or
Rabbit Semiconductor partner, contact the distributor or Z-World partner first for tech-
nical support.
If there are any problems at this point:
•
Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/.
•
Use the Technical Support e-mail form at www.zworld.com/support/.