![background image](http://html1.mh-extra.com/html/rabbit/rcm3100/rcm3100_user-manual_3123506044.webp)
Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-0533 - KIT DEV RABBIT3000/RCM3100
Contact us: [email protected] Website: www.integrated-circuit.com
User’s Manual
37
A.1.2 Headers
The RCM3100 uses headers at J1 and J2 for physical connection to other boards. J1 and J2
are 2 × 17 SMT headers with a 2 mm pin spacing. J3, the programming port, is a 2 × 5
header with a 2 mm pin spacing.
Figure A-3 shows the layout of another board for the RCM3100 to be plugged into. These
values are relative to the mounting hole.
Figure A-3. User Board Footprint for RCM3100
A.1.3 Physical Mounting
A standoff with a 2-56 screw is recommended to attach the RCM3100 to a user board at
the hole position shown in Figure A-3.
J3
0.973
(24.7)
1.341
(34.1)
J1
J2
RCM3100 Footprint
0.079
(2.0)
0.100
dia
(2.5)
0.020 sq typ
(0.5)
0.079
(2.0)
0.314
(8.0)
1.121
(28.5)
1.136
(28.9)
44 / 111
44 / 111