Rabbit RCM2000, Getting Started Manual

Page: 11 / 38

Getting Started 7
2. H
ARDWARE
S
ETUP
This chapter describes the RCM2000 hardware in more detail,
and explains how to set up the accompanying Prototyping
Board.
NOTE: This chapter (and this manual) assume that you have the RabbitCore RCM2000
Development Kit. If you purchased an RCM2000 series module by itself, you will have
to adapt the information in this chapter and elsewhere to your test and development
setup.
2.1 Development Kit Contents
The RCM2000 series Development Kit contains the following items:
•
RCM2020 module with 256K flash memory and 128K SRAM.
•
RCM2000 Prototyping Board with accessory hardware and components.
•
Wall transformer power supply, 12 V DC, 500 mA (included only with Development
Kits sold for the North American market. Overseas users will need a power supply
compatible with their local mains power).
•
10-pin header to DE9 programming cable with integrated level-matching circuitry.
•
Dynamic C CD-ROM, with complete product documentation on disk.
•
This Getting Started manual.
•
Registration card.