60
RabbitCore RCM3750
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
•
LAN —
Connect the RCM3750 module’s Ethernet port to an existing LAN, preferably
one to which the development PC is already connected. You will need to obtain IP
addressing information from your network administrator.
•
WAN —
The RCM3750 is capable of direct connection to the Internet and other Wide
Area Networks, but exceptional care should be used with IP address settings and all
network-related programming and development. We recommend that development and
debugging be done on a local network before connecting a RabbitCore system to the
Internet.
TIP:
Checking and debugging the initial setup on a micro-LAN is recommended before
connecting the system to a LAN or WAN.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
3. Apply Power
Plug in the AC adapter. The RCM3750 module and Prototyping Board are now ready to
be used.
Summary of Contents for RabbitCore
