INSTRUCTIONS
X17™
XFU 3-WAY FIELD-ADJUSTABLE
FLOODLIGHT INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2021 RAB LIGHTING Inc.
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V, 50 or
60 Hz. For 0-10 Dimming, follow the wiring directions as shown in
Fig. 7.
1. Connect the black/brown fixture lead to the LINE supply lead.
2. Connect the white/blue fixture lead to the COMMON supply
lead.
3. Connect the green/yellow wire from fixture to supply ground.
Do NOT connect the GROUND of the dimming fixture to
the output.
4. Connect the purple fixture lead to the DIM V+ lead.
5. Connect the pink/gray fixture lead to the DIM V- lead.
6. Cap the yellow fixture lead, if present. Do NOT connect.
TROUBLESHOOTING
1. Is the fixture grounded properly?
2. It is recommended that gloves be worn to avoid injury
during installation.
3. If any smoke or spark, please turn off the power immediately.
X17 XFU 60-50-30 IN-1021
Note:
These instructions do not cover all details or variations in equipment nor do they
provide for every possible situation during installation, operation or maintenance.
P-100056
BLACK/BROWN
LINE
WHITE/BLUE
COMMON
PURPLE
(+) DIM V+
PINK/GRAY
GREEN/YELLOW
(-) DIM V-
GROUND
Fig: 7
FIELD ADJUSTMENT
Follow instructions below to change fixture
Power
(
W
) or
Color
Temperature
(
CCT
) from the factory settings and
Photocell
On/Off
option.
Factory Settings: 4000K and 60W
1. Remove
Selector Switch Caps
by turning counterclockwise
using a flat head screwdriver
(Fig. 5).
2. Locate the
Selector Switches
on the fixture
(Fig. 6).
3. Select
Power
(
W
) and
Color Temperature
(
CCT
)
by sliding the
respective switch to the desired value.
4. Select
Photocell
On/Off option by sliding respective switch
to the desired value.
5. Replace
Selector Switch Caps
and tighten with a flat head
screwdriver.
5K
4K
3K
3
2
1
Selector Switch Caps
Fig: 5
Fig: 6
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to touch.
Do not clean or maintain while fixture is energized.
1. Clean
glass lens
with non-abrasive glass cleaning solution.
2. Do not open the fixture to clean the LED. Do not touch the LED.
