20W LED WALLPACK INSTALLATION INSTRUCTIONS
TROUBLESHOOTING
1. Check that the line voltage at fi xture is correct. Refer
to wiring directions.
2. Is the fi xture is grounded properly?
3. Is the photocell, if used, functioning properly?
WPLED20x3-IN-1010
CLEANING & MAINTENANCE
CAUTION: Be sure fi xture temperature is cool
enough to touch. Do not clean or maintain while
fi xture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open fi xture to clean the LED. Do not touch
the LED.
-*()5
'*9563&
-*/&
#-"$,
$0..0/
8)*5&
(306/%
(306/%
WIRING
Universal voltage driver permits operation at
100V to 277VAC, 50 or 60Hz except those factory
ordered with a 120V photocell (/PC).
1. Connect the black fi xture lead to the (+) LINE
supply lead.
2. Connect the white fi xture lead to the (-) COMMON
supply lead.
3. Connect the bare copper Ground wire from fi xture to
supply ground.
JUNCTION BOX
1. The Junction box has (4) conduit entry points on the
center of each side and (1) in the center back.
2.
Mounting Points
are dimensioned below.
US and International Patents Pending
4 3/4”
2 3/16”
3 1/2”
1 1/8”
1 1/8”
Mounting Points
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
