RAB VAN GARAGE LIGHTER, Installation Instructions Manual

Page: 2 / 2

VAN GARAGE LIGHTER
(
continued
)
THESE INSTRUCTIONS
DO NOT COVER ALL DETAILS OR
VARIATIONS IN EQUIPMENT, NOR DO THEY PROVIDE FOR
EVERY POSSIBLE CONTINGENCY TO BE MET IN CONNEC-
TION WITH INSTALLATION, OPERATION OR MAINTENANCE.
Check that:
1. Proper lamp is installed. Lamp is not faulty.
2. Line voltage at the fixture is proper.
3. Fixture is wired properly.
4. Fixture is grounded properly.
TROUBLESHOOTING CHECKLIST
CLEANING
CAUTION: Be sure fixture temperature is cool enough to
touch. Be sure power is off.
Clean reflector and refractor with a cloth moistened with
non abrasive glass cleaning solution.
RE-LAMPING
CAUTION:
Prior to installing, check that the lamp is of proper type and wattage. Observe lamp manufacturer’s recom-
mendations on lamp operation, ballast type and burning positions. Disconnect power. Make sure fixture and lamp are cool
enough to touch.
1. Loosen screws holding refractor.
2. Remove refractor and replace lamp.
3. Close refractor and tighten screws.
WIRING
Use supply wire rated for 90°C.
Make sure the supply voltage is compatible with the unit. Multi tap
units may be used with a choice of 120v, 208v, 240v and 277v,
provided that proper ballast leads are connected in the field. Units
built for a specific voltage are factory-wired for the requested voltage.
1. If other than 120V, connect the appropriate ballast
lead to the black supply lead. Cap the 120v lead.
2. Connect the common ballast lead to white
supply lead.
PHOTOEYE INSTALLATION
A photoeye control may be installed in the field.
1. Remove reflector and refractor.
2. Remove close-up plug on desired side of fixture.
3. Install Photoeye and wire as per diagram.
(+) LINE
RED
(–) COMMON WHITE
SUPPLY
BLACK
LIGHT
FIXTURE
PHOTOEYE
© RAB Lighting, 9464-0 7/04
EASY INSTALLATION & PRODUCT HELP
Fax Back Tech Help Line
Faxed Tips & Specs, Call our friendly experts.
24 hours/day. 8AM - 5PM ET Mon. - Fri.
888 RAB-1236 888 RAB-1000
www.rabweb.com e-mail
Visit our internet site for Your questions and requests
color product photos will be answered promptly.
and installation tips. tech@rabweb.com
RAB Lighting
170 Ludlow Avenue Northvale, New Jersey 07647 U.S.A.
RA
B
MAKES
IT
EASY!
LIGHT
FIXTURE
BLACK (+) LINE
WHITE (–) COMMON
GROUND
SUPPL
Y
REPLACEMENT LAMPS
Metal Halide High Pressure Sodium
ANSI ANSI
Wattage Catalog # Code Wattage Catalog # Code
150 LMH150 M107 150 LHPS150 S55
175 LMH175 M57
200 LMH200MEDPS M136
Induction Compact Fluorescent
Wattage Catalog # Wattage Catalog #
55 LQL55 60 LCFL60
85 LQL85
3. Fixture ground wire must be connected to supply
ground.
4. All unused leads must be capped and insulated.
GROUND