Tuff Dome
Vandal Resistant
Outdoor Motion Sensor
Installation Manual
RAB
It’s easy
to add
vandal r
esistant
motion detection
to outdoor
lights!
Specifications
Switching Capacity:
Relay On/Off Model:
500 watts Incandescent when used
remotely, 250 watts when floodlights
are mounted to it.
250 watts Fluorescent @ 120 volts
Hi/Lo Model:
Runs at 20% lamp wattage from
dusk to dawn. Brightens to full
wattage upon sensor detection.
180 watts Incandescent maximum.
Voltage:
120 Volts AC
Power Consumption:
One watt
UL Listing:
Raintight Photoelectric
Switch. Suitable for wet locations.
Time Adjustment:
5 seconds to 15 minutes
Quick Test Time:
5 second test time for fast installation.
Works day or night.
Detection Zone:
Full180º by 30’
“No Hands” Auto Testing:
Auto mode starts after 3 minutes of
testing. No adjustment needed.
Built for Severe Conditions:
Double weatherproofing for long life.
Photoelectric Control:
Deactivates lights during daylight.
Fully adjustable for 24 hour
operation or custom applications.
Vandal Resistant Lens:
Hard lens resists casual vandalism.
Case Construction:
Precision molded Lexan®
Color Matched Lens:
Dark lens with black units.
White lens with white units.
Surge Protection:
Withstands up to 3000 volts
Manual Override:
Double flip wall switch logic prevents
activation by short power outages.
Resets to auto at dawn. No extra
wiring needed.
LED Detection Indicator:
Glows red day and night for
“on-guard” deterrence.
RF Immunity:
Circuits fully shielded for maximum
radio frequency immunity.
2
Contents
