INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
FIELD ADJUSTMENT
Color
(CCT)
Selection Switch
Power
(W)
Selection Switch
TOMO-2
TOMO-4
TOMO-8
Fig: 9
Fig: 10
Fig: 11
Power
(W)
Selection Switch
Color
(CCT)
Selection Switch
Color
(CCT)
Selection Switch
Power
(W)
Selection Switch
CONTINUOUS RUN MOUNTING
Multiple fi xtures can be mounted together using TOMO CONNECT
TOMO CONNECT
(sold separately).
Note: Continuous Run Mounting is not
a
vailable with
LIGHTCLOUD® /LC, /LC/E suffi x.
1. For continuous run, remove fi xture
End Caps
(Fig. 6)
. Pop out
Silicone Plugs
, push Fixtures together using
TOMO CONNECT
(ordered separeately)
between fi xtures for quick connect
installation
(Fig. 7)
.
TOMO CONNECT
is provided with
(2)
Fixing
Screws
. Install
Fixing Screws
in
Silicone Plug
points. Only
(1)
one
Fixture
needs to be electrically hardwired from above
(Fig. 8)
.
2.
CAUTION:
The maximum number of fi xtures allowed to be linked
together is indicated in table below
(120V through 277V only)
.
WARNING: To prevent wiring damage or abrasion, do not expose
wiring to sharp objects.
Catalog #
TOMO-2
TOMO-4
TOMO-8
Maximum Number of Linked Fixtures
Up to
28
fi xtures
Up to
14
fi xtures
Up to
7
fi xtures
TOMO CONNECT
Fig: 6
Fig: 7
Fig: 8
Fixing Screws
Silicone Plug
TOMO
CONNECT
Follow instructions below to change the fi xture
Color Temperature
(CCT)
and
Power
(W)
from the factory settings.
Factory Settings: TOMO-2 18W / 4000K
TOMO-4 36W / 4000K
TOMO-8 72W / 4000K
1.
Remove
End Caps
. Slide
Lens Tray Assembly
from
Housing
Cover
to release
Tray Assembly
from
Housing Cover
by sliding
the fi xture to the right to unlock from
Key Slots
as shown in
Fig. 3
.
Pre-installed
Tether Cables
(2)
will prevent
Lens and Tray
Assembly
from separating from
Housing Cover
as shown in Fig.
1
.
2.
Locate the selector switches inside the
Lens & Tray Assembly
as
shown below for TOMO-2, TOMO-4 TOMO-8
(Fig. 9, 10, 11).
Note:
TOMO-8 is equipped with two
(2)
Color Temperature
(CCT)
switches and
(2)
two Power
(W)
switches.
3.
Select a
Color Temperature
(CCT)
and
Power
(W)
by sliding the
respective switch to the desired value.
4.
After the switch is positioned to the desired setting, push
Lens
and Tray Assembly
into the
Housing Cover
. Align
Keys
into
Key
Slots
and slide to the left to lock the
Housing Cover
into the
Lens and Tray Assembly
. Snap on
End Caps
.
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to edges of sharp objects.
