INSTRUCTIONS
PIP® 45W INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. 0-10V control wires must be rated for 300V minimum.
Factory ordered fixtures with suffix
(/PCU)
are with 120V-277V
button photocell. For 0-10V Dimming follow the wiring directions
as shown in
Fig 3
.
1. Connect the
Black
fixture lead to the
LINE
supply lead.
2. Connect the
White
fixture lead to the
COMMON
supply lead.
3. Connect the
GROUND
wire from fixture to supply ground.
DO NOT
connect the
GROUND
of the dimming fixture to
the output.
4. Connect the
Purple
fixture lead to the
(V+) DIM
lead.
5. Connect the
Pink
(or gray)
fixture lead to the
(V-) DIM
lead.
6. Cap the
Yellow
fixture lead.
DO NOT
connect.
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE
BLACK
WHITE
PURPLE
PIP 45 IN - 1121
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2021 RAB LIGHTING Inc.
RAB WARRANTY:
RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
Note:
These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Fig. 3
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to touch.
Do not clean or maintain while fixture is energized.
1. Lens should be washed in a solution of warm water and any
mild, non-abrasive household detergent, rinsed with clean
water and wiped dry.
2. Do not open the fixture to clean the LED. Do not touch the LED.
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct. Refer to wiring
directions.
2. Be sure the fixture is grounded properly.
3. Be sure the photocell is functioning properly.
73466-RAB