RAB LOS800 Instructions Download Page 5

RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install 

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]

Note:  

These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.

ADDITIONAL FEATURES AVAILABLE ON PIR SENSOR

Use the WSREM handheld configuration tool to disable or enable following 
modes:

Burn-In Mode: 

When Burn-In Mode is invoked the output will turn ON for 100 

hours continuously. However, the Push Button or remote can be used to turn 
the load OFF, and the sensor will exit Burn-In Mode. Default setting is Disabled.

Walk-Through Mode:

 In this mode, the load will turn off after a 3 minute 

period following an initial occupancy event if there is no motion detected after 
the first 30 seconds. If occupancy continues beyond the first 30 seconds, the 
established time delay applies. Default setting is Disabled.

Visual Alert: 

When enabled, Visual Alert turns the load OFF for 1 second to 

warn any occupants of impending shutoff 1 minute before the time delay 
countdown expires. Default setting is Disabled.

Occupancy mode: 

When Occupancy mode is disabled, the LED will always be 

on; both motion detection and light level functionality are disabled, and only 
the Push Button or remote can toggle the load ON and OFF. The default setting 
for Service mode is Enabled.

Red

Black

White

Neutral

Hot

Load

WIRING FOR PIR SENSOR

Fig. 4

INSTRUCTIONS

 

HIGH/LOW BAY PASSIVE INFRARED OCCUPANCY AND DAYLIGHT SENSOR

Easy Answers

rablighting.com

Visit our website for product info

Tech Help Line

Call our experts: 888 722-1000

e-mail

Answered promptly - [email protected]

Free Lighting Layouts

Answered online or by request

© 2021 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

RAB WARRANTY:

 

RAB’s Warranty is subject to all terms and conditions found at rablighting.com/warranty. 

PATENT:

 

rablighting.com/ip

LOS800-IN-

0521

73261-RAB

Summary of Contents for LOS800






Reviews: