Installation
9
b.
Choose a location that is as close to as many
other Lightcloud devices as possible.
c.
Test the cellular signal.
Plug-in the Gateway and check the cellular signal
strength. The cellular signal strength LED should
be solid green. Yellow is also adequate but not ideal.
If the cellular signal strength LED is off, move the
Gateway to a new location and test again.
3 STATE SIGNAL STRENGTH INDICATOR LIGHT
- DARK (OFF), YELLOW, GREEN
10
0’
Ra
diu
s of
Ga
tew
ay 4
G*
100’
Rad
ius o
f G
ate
way
4G
*
100’ Radius of Gateway 4G*
Controller
Sensor
Daylight
Dimmer
10
0’
Ra
diu
s of
Ga
tew
ay 4
G*
100’
Rad
ius o
f G
ate
way
4G
*
100’ Radius of Gateway 4G*
Controller
Sensor
Daylight
Dimmer
Gateway 4G
Gateway 4G
Gateway 4G
*All of the devices don’t have to be within a 100’ of the Gateway 4G, but it’s ideal to have
as many within direct range as possible.
Color
Description
DARK (OFF)
None (or very poor) cellular signal. Relocating
device to a better location is recommended.
YELLOW
Adequate cellular signal. This signal strength
works for most applications.
GREEN
Optimal cellular signal. This signal level
is preferred for device to operate at peak
performance.
