FFLED INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
Patent - US:
Pat D643,147
ACCESSORIES AND REPLACEMENT
PARTS
Chrome Wire Guard:
GDFFLED39W
Poly Shield:
GDFFLED39P
Lens & Door Replacement:
LFFLED39 (bronze)
LFFLED39W
(white)
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2015 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
FFLED263952 IN 0315
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4) #8-32
Stainless
Steel Screws.
Screws are provided with accessory. Guard
and Shield may be used together. See figure 1 for Guard. See
figure 2 for Shield
1.
Line up guard with pre-existing, pre-drilled holes in
frame as shown, tighten screws.
Stainless Steel
Screws (4)
Figure 1
Figure 2
Stainless Steel
Screws (4)
ON-OFF WIRING
Universal voltage driver permits operation at 120V to 277VAC,
50 or 60Hz, except fixtures factory ordered with a 120V
photocell (/PC), 120V swivel photocell (/PCS), 277V photocell
(/PC2) and 277V swivel photocell (/PCS2). Units ordered with
(/480V) suffix are 480V. For Non-Dimming, follow the wiring
directions as in fig. 1.
1.
Connect the black fixture lead to the (+) LINE supply lead.
2.
Connect the white fixture lead to the (-) COMMON supply
lead.
3.
Connect the bare copper Ground wire from fixture to
supply ground.
LIGHT
FIXTURE
(+)LINE
BLACK
(-)COMMON
WHITE
GROUND
GROUND
Fig. 1
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. For 0-10V Dimming, follow the wiring directions
as in fig. 2.
1.
Connect the black fixture lead to the (+) LINE supply lead.
2.
Connect the white fixture lead to the (-) COMMON supply
lead.
3.
Connect the GROUND wire from fixture to supply ground.
Do NOT connect the GROUND of the dimming fixture to
the output.
4.
Connect the purple fixture lead to the (V+) DIM lead.
5.
Connect the gray fixture lead to the (V-) DIM lead.
6.
Cap the yellow fixture lead, if present. Do NOT connect.
