WPLED
TM
78W WALL MOUNT INSTALLATION INSTRUCTIONS
®
Page 2
4.57”
2.4”
1.09”
.79”
3.0”
TROUBLESHOOTING
1. Check that the line voltage at fi xture is correct. Refer
to wiring directions.
2. Is
the
fi xture grounded properly?
3. Is the photocell functioning properly (if used)?
CLEANING & MAINTENANCE
CAUTION: Be sure fi xture temperature is cool
enough to touch. Do not clean or maintain while
fi xture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open fi xture to clean the LED. Do not touch
the LED.
-*()5
'*9563&
-*/&
#-"$,
$0..0/
8)*5&
(306/%
(306/%
WIRING
Universal voltage driver permits operation at 120 to
277VAC, 50 or 60Hz.
1. Connect the black fi xture lead to the (+) LINE
supply lead.
2. Connect the white fi xture lead to the (-) COMMON
supply lead.
3. Connect the bare copper Ground wire from fi xture to
supply ground.
Key Hole Slot
RAB fi xture designs are protected under
U.S. and International Intellectual Property laws.
Patent pending.
WALL MOUNT BOX DETAILS
Wall Feed
Conduit Feed
Hardware
(not supplied)