BULLET2X12 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct. Refer
to wiring section.
2. Check the fixture is grounded properly.
BULLET2X12-IN-0816
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1. Clean lens & fixture with non-abrasive cleaning
solution.
2. Do not open fixture to clean the LED. Do not touch
the LED.
3. Keep leaves and debris out of hood.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2016 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during
installation, operation or maintenance.
LIGHT
FIXTURE
(+)LINE
BLACK
(-)COMMON
WHITE
GROUND
GROUND
ON-OFF WIRING
Operates only at 120V, 60 Hz. Fixture can be dimmed with most
forward phase incandescent dimmers. For list of compatible
dimmers see www.rablighting.com.
1. Connect the black fixture lead to the (+) LINE supply lead.
2. Connect the white fixture lead to the (-) COMMON supply
lead.
3. Connect the GROUND wire from fixture to supply ground.
Patent:
US: D747,525; CA: D RAB Lighting Inc; CN: ZL201430359253.9; MX: 45200; TW: D171128, D173134
