6
Warning:
your flashlight is very bright on the higher brightness levels.
You should avoid looking directly into the reflector as the light can be
intense enough to injure your eyes.
Warning:
a sudden total failure is unlikely but is still possible.
We
recommend you always carry a second light during critical situations
(e.g., caving).
We also recommend you carry enough spare batteries
to cover your lighting requirements plus a reasonable safety margin.
It
is not necessary to start each trip with a new battery in your flashlight
as long as you have spare batteries along.
Warning:
only install fully charged rechargeable batteries. Using a
partially charged battery may result in the battery not being properly
recognized as a rechargeable battery. This can lead to the
rechargeable battery being over-discharged and damaged.
Warning:
do not recharge a rechargeable battery if you think it has
been over-discharged or otherwise damaged. Dispose of the
damaged battery immediately. An over-discharged or otherwise
damaged battery can vent or explode when the battery is recharged or
when the battery is subsequently used.
Warning:
water – especially salt water – in the battery compartment
will cause electrolysis, giving off hydrogen and oxygen – an explosive
gas mixture. Electrolysis will also cause corrosion. If water gets
inside of the battery compartment, immediately open the battery
compartment, rinse the battery compartment and battery with fresh
water and allow your flashlight and the battery to completely dry.
7. Customizing Your Flashlight
Your flashlight may be customized so you can perform special tasks
more efficiently. You can customize each brightness setting through
the Brightness Menu and you can customize many special features
through the Option Menu. Together these features allow you to build
a specialized flashlight optimized for the tasks you perform on a
regular basis – and even tasks you rarely perform.
8. Factory Reset
Please feel free to experiment. You can always return to the original
factory settings by following these steps: