37
36
35
3
13
G
B
OTHER SIZE OF PANDA
SEAT FOR PANDA
EASYFIT
If you change the size of the seat, you also need
to change the adapter. Please follow instructions
below:
- Unscrew the Italian handle (37) totally.
- Pull the front mounting rod (36) totally out of
the adapter tube (take care that the metal
washers and plastic bearing bushes stay
together).
- Remove the plastic covers from the nuts on
the rear mounting rod (35).
- Lossen the nut and remove the rear mounting
rod (35) totally (take care that the plastic
washers and plastic bearing bushes stay
together).
- The adapter (3) with the Panda seat unit is
separated now and can be removed.
- Place the new adapter with the other size
Panda seat unit between the Easyfit frame
and place the rear mounting rod (35) through
the adapter tube (take care that the plastic
bearing bushes and washers are in the right
position again).
- Mount the nut on the rear mounting rod (35)
and do not tighten this nut too much (adapter
(3) should move freely through the slots).
- Place the two plastic caps on the nuts.
- Place the front mounting rod (36) in the
adapter tube and tighten the Italian handle
(take care that the plastic bearing bushes and
washers are in the right position again).
IMPORTANT! The plastic washers should
be mounted on the rear mounting rod (35)
and the thick metal washers should be
mounted on the front mounting rod (36).