R82 Cougar, User Manual

Page: 22 / 44

22
A
B
C
E
A
D
F
G
B
COUGAR BACK
The Cougar may be purchased with either a
wooden back, strap back or manufactured for
a special back system.
Back with a wooden plate:
The wooden plate is mounted in the rails on the
back.
Strap back:
The strap back is mounted in the rails on the
back. The straps can be adjusted to obtain e.g.
more or less lumber support. The straps are
equipped with velco (A) to aid the adjustment.
Prepared for foreign back:
The Cougar can be manufactured for special
backs from other manufactureres to be instal-
led. The "special" back and its fittings can be
mounted on the round tubes in the back. Fol-
low the instructions which is included with the
"special" back.
GB
MUDGUARD
Mudguards can be mounted on the Cougar.
Follow the description below to mount the mud-
guards correctly:
1) Mount the fitting for the mudguards in the
plastic fitting on the rear part of the frame
(A). Remove the two screws and mount the
enclosed bushings (B).
2) Then mount the fitting (C) using the enclosed
spring washer and bolts (D). Use the 5 mm
Allen key.
3) Finally place the mudguards (E) in the fittings.
Bolts, washers and nuts (F) are pulled as far
up the rails as possible and tightened.
On some adjustments of the chair it might
be an advantage to mount the mudguard
on the other side of the fitting.
GB