23
B
A
C
D
E
G
B
LEG RESTS AND
FOOT PLATES
These leg rests and foot plates cannot be used
on Combi Frame size 1. See next page.
Follow the directions below to install leg rests
on the Combi Frame:
1) Installation of the leg rests:
Remove the end-piece (A) by using a screw-
driver. Install the fittings for leg rests and
fasten with the enclosed 5 mm Allen key.
Reinstall the end-piece. Place the leg rest in
the fitting. Push down the release button (B)
when installing/removing the leg rest. Make
sure the release button clicks into place.
2) "Swing-away" function:
Push down the release button (B) and pull the
leg rest up a little to be able to swing it to the
side.
Turn the leg rest into place and make sure the
release button (B) clicks into place for use.
3) Angle adjustable leg rests:
Push down the handle (C) to angle the leg
rests individually.
4) Height adjustable foot plate:
Remove the screw (D) by using the enclosed
5 mm Allen key. Adjust the height of the foot
plate and replace the screw.
5) Angle adjustable foot plate:
Use the enclosed 5 mm Allen key to loosen
the screws (E). Adjust the angle of the foot
plate individually and fasten the screws.
This leg rest can not be used together with
transport fittings for transporting children in
vehicles. We recommend to use the foot
supports described on the next page.
GB
