18
A
C
B
E
N
G
L
I
S
H
PLANAR SEAT DEPTH AND
BACK HEIGHT ADJUSTMENT
If you need to adjust the width of the back or
seat, please do this before you adjust the depth
of the seat and height of the back (see the pre-
vious page).
Seat depth:
* Loosen the 8 screws (A) with the enclosed 3
mm Allen key with ball end to adjust the seat
depth.
* When the seat depth is adjusted the back
needs to be adjusted also. Use the enclosed
4 mm Allen key to loosen the 2 screws (B) on
both sides of the chair and adjust the back
into the required position.
Back height:
* Loosen the 8 screws (C) with the enclosed 4
mm Allen key with ball end to adjust the back
up or down.
The back- and seat plates are mounted into rails,
which have the same length as the cushions in
the chair. Move the cushions into place, when
the depth and height adjustments have been
made.
To maintain the optimal seating comfort,
with the seat plate moved all the way back,
a seat extension or a web extension can
be added.
Do not position the seat and back behind
the center of gravity.
Make sure that all screws have been fa-
stened safely after adjustments have been
made.
